vosprofils.com
  • Home
  • Technology
  • Contact
  • About Me
Home - Archives for Mercert - Page 9
Author

Mercert

Mercert

Navigation System
Life Tips

Significance Of Installing Navigation System For Car

by Mercert September 5, 2019
written by Mercert

Unquestionably, the navigation system for the car is an essential tool that you should consider mounting in your car. Although you may decide to use your smartphone for navigation, there are numerous benefits that you are likely to enjoy when you have the system installed in your car. Consequently, if you do a BMW x3 e83 navigation installation, you are likely to enjoy the benefits discussed in this article, among others.

  • Accurate guide

Cars with navigation systems built-in give you precise guiding due to an up-to-date system. It helps you know the most effective route to use since it gives you additional information such as the traffic situations in various routes. Additionally, it is safer to use the system in question since you don’t have to rely on a stranger for guidance. Sometimes strangers maybe having some ill intentions; thus, they end up misleading.

  • Increase resale value

In a comparison between using a car navigation system vs a smartphone, the car system is more advantageous since it increases the resale value for your vehicle. Most car buyers prefer purchasing a car that is well equipped with the necessary tools. Also, the system in question enhances the car look due to the large screen with beautiful graphics.

Navigation System
  • Stable GPS connection

Similarly, a stable connection is one of the benefits of a navigation system in car. The GPS receiver in a car navigation system is equipped with a better signal receiving capacity globally. As a result, it is not easy for it to lose the signal while going to a new direction, thus making it more reliable.

  • Updated online and offline 3D maps

Likewise, another benefit of GPS in cars is the up-to-date 3D maps. The system in question is equipped with an automatic Over-The-Air (OTA) updates, which enables the system to access offline maps that have accurate information. Besides, the system is also capable of accessing online maps and gives 3D maps experience.

  • Active and ready to guide

Comparatively, a navigation map on the dashboard-mounted touchscreen uses the vehicle battery power, thus doesn’t run out of charge as the smartphones sometimes do. Subsequently, the installed system remains active always and ready to direct you to various destinations. Although you can use USB cables to charge your smartphone battery, it is risky to plugging it while driving. Also, the phone can be a distraction since you can be interested in looking at the message from a friend that may pop out on your smartphone screen as you drive.

Navigation System
  • Less distracting

In the dashboard navigation system, it is more efficient since the device is integrated with the in-vehicle system. For example, when the navigation system is notifying you of a turn ahead through a voice assistant, the music or radio muffles automatically, thus enabling you to hear the information. Consequently, the system minimizes the distraction that might hinder you hearing the notifications given.

In conclusion,

Generally, numerous advantages come with a navigation system for the car. Fewer distractions, updated 3D maps, stable GPS connection, and accurate guide are some of the benefits enjoyed. Also, the system is always active and ready to guide and increases the resale value for your car. Therefore, you need to ensure that your vehicle is installed with a navigation system.

September 5, 2019 0 comment
0 FacebookTwitterPinterestEmail
vapes
Life Tips

7 Tips to Finding the Ideal CBD Oil Cartridge for your Vaping Needs

by Mercert August 27, 2019
written by Mercert

The production of cannabinoid (CBD) products is increasing to becoming one of the largest industries in the globe. Every day, more and more CBD oils are produced, and the yearly sales are projected to hit 1 billion dollars come the year 2020.

The popularity of CBD oil has been on the rise due to the associated numerous benefits. As such, that popularity is pushing for the high demand for the CBD oil cartridge. It is an implication that more CBD oil cartridges will be stocked in shops day by day.

Unluckily, not every CBD oil cartridge created is similar to the other; it is up to you to determine which is which.

So, how do you find the ideal CBD oil cartridge to address your vaping need?

This article focuses on providing you with seven factors to take into account before purchasing a CBD oil cartridge.

Seven factors to take into account before purchasing a CBD oil cartridge

1. Battery longevity

How long does the battery last before the next charge? Take into consideration the time it takes to get charged in full, and the time it takes to drain fully when in use. Besides, make sure the CBD oil cartridge comes with a charger.

2. Dealer

The supplier for CBD oil cartridge determines its quality. A staggering 84% of people trust online reviews, thus, it is up to you to conduct online research to assess customer reviews. If positive reviews dominate the search, go ahead to buy from that particular dealer since the chances are high that they sell high-quality cartridges.

3. Ingredients

Typically, CBD oil comprises vegetable glycerin (VG) and propylene glycol (PG). But, both components can be applied in one CBD oil cartridge, while others can have either but not both. It is essential to have in mind that some oil cartridges contain purely hemp oil. Hence, when buying the cartridge, it is up to you to give out your specifications.

4. Lab test provision

In case you strictly vape CBD oil with concerns to your health, then buy the correct CBD oil cartridge. A number of the companies do lab testing of the oil to assess the percentage of hemp, and the results can be availed to you on request.

5. Oil concentration

Although there are no or less associated side effects associated with overusing CBD oil, it may alter your tolerance. Therefore, at some point, you will be pushed to purchase a larger CBD oil cartridge (about 1000 milligrams). That will be within a shorter time since each vape won’t always be enough. Hence, it is up to you to look out for the mg/ml labeling to get the right concentration.

6. Pricing

Regardless of your budget, you will always encounter both original and fake CBD oil cartridges in the marketplace. But, the cartridge’s size helps in evaluating its cost. For instance, supposing its capacity is 1 milliliter; usually, its price will be less compared to 200 milligrams-cartridge. Additionally, a fake cartridge will always be cheaper than the original one.

7. Size

The majority of CBD oil cartridges will always be filled with the respective oil before being sold. That means your decision to buy a particular cartridge depends on the required size. In case you are new to vaping, it is up to you, to begin with, a 100-milligram cartridge for testing before going for the larger ones.

The bottom-line

To get the most suitable CBD oil cartridge, consider the factors mentioned above and if possible, watch out for product reviews before making a purchase.

August 27, 2019 0 comment
0 FacebookTwitterPinterestEmail
Technology

Several Terry Thermal Polyurethane Laminate (PUL) Fabric Uses In Different Fields

by Mercert August 2, 2019
written by Mercert

Unquestionably, Terry cloth fabric laminated with TPU membrane is applicable in various areas for product manufacturing. Arguably, the wide range of application is due to the high durability of the laminated fabric, its water-resistant nature, and it is easy to wash. Besides, apart from Terry fabric laminated cloth having cotton backing, which makes it more comfortable on the skin, its material is more pliable and soft.  Therefore, if you want to know various Thermal PUL fabric uses, consider reading through this article.

  • In making placemats

Proper sanitation is essential for a healthy life. Subsequently, it is vital to keep the dining tables and kitchen services clean. Use of Terry thermal polyurethane laminate fabric placemats to wipe up spills and drips is one of the best ways of ensuring the surfaces are clean. Besides, the placemats in question also protect the table from the heat by placing it under the plate or cup.

Terry Thermal Polyurethane Laminate (PUL) Fabric
  • Snack bags

Similarly, snacks and other food products should be packed on clean and safe bags as a way of reducing illness risk hazards. Consequently, Terry transparent, polyurethane fabric bags are washable, reusable, and keeps sandwiches and snacks secure. As a result, you are guaranteed of the bag’s cleanliness, thus making it fit to use for carrying foodstuffs. Also, it is economical as it can be used severally due to its high durability.

  • Beach bag

Certainly, individuals would like to take with them some of their valuables, such as mobile phones, to the beach. However, the risk is high because such devices can be easily destroyed by water. Consequently, using TPUL Terry cloth, some manufacturers came up with waterproof fabric spotlight beach bags that would make it easier for you to carry your valuables to the beach, and they are safe from water.

  • Making baby bibs
Terry Thermal Polyurethane Laminate (PUL) Fabric

Indisputably, baby bibs play a vital role in protecting the kids from dirtying themselves while eating. The PUL Terry cloth fabric is one of the best for making the baby bibs due to its softness and the lamination. Consequently, the kid will be more comfortable with it, and it is friendlier since it can be used even when the kid is drinking either milk or water without wetting their clothes.

  • Zipper purse

In the recent past, clear PUL fabric has become one of the primary materials used for making zipper purse. The PUL fabric being water-resistance is the main feature that makes it more suitable for making the purse. In most cases, items carried in a zipper purse are water sensitive, thus the need for waterproof material.

  • Seat cushions

Unquestionably, seat cushions need to be soft and comfortable. Besides, the material used need to be pliable so that it can be easily formed into different shapes and designs. Also, water-resistant material is an added advantage since it will be easy to dry it up in case of accidental liquid spillage on it. A laminated PUL fabric contains all the named features, thus making it more suitable for the use in question.

In conclusion

Conclusively, a laminated Terry cloth contains a lot of essential elements. Consequently, it is ideal for various situations, thus being applicable in several fields. This article looks at some common PUL fabric uses has most manufacturers have focused on producing.

August 2, 2019 0 comment
0 FacebookTwitterPinterestEmail
Silver Melting Furnace
Technology

7 Guidelines To Help In Selecting The Right Silver Melting Furnace Supplier

by Mercert July 25, 2019
written by Mercert

Silver is a common precious metal. It’s also often used in electronics and jewelry. A silver melting furnace is an advanced version of the electrically powered melting machine. This furnace saves up to about 15 percent of the energy used in the melting process. The advanced version also uses the induction heating process in producing heat.  It’s essential to choose the right silver melting furnace supplier for your projects. Here is a list of factors to look at when selecting a silver melting furnace too.

  • Check a Variety of Options

There are different types of silver melting furnaces. There are also various options. Efficiency is a primary measuring stick. It differentiates one silver melting furnace from the rest. Consider the variety a supplier has when selecting the right silver melting furnace. Is it water-resistant? Can the furnace withstand pressure changes? These are some of the questions to consider.

  •  Go Through Client Online Reviews

Another way to weed out ineffective suppliers of a silver melting furnace is going through the client’s online reviews. Like with any other product, a trusted supplier will provide proof of craftsmanship. Confirm that the supplier has worked with satisfied clients who can offer reviews. A standard quality check needs to be done before purchasing the furnace.

  •  Can The Supplier Offer The Preferred Size?
Silver Melting Furnace

When shopping for that perfect silver melting machine, you need to ensure that you get the right size for your project. This can be measured by looking at the size of your facility and the furnace’s heat output. The channel needs to integrate with the system to offer consistent heat. A small furnace will not generate sufficient heat. On the other hand, a huge furnace will waste heat and money. Work with a supplier who will provide your recommended size of silver melting machine.

  • Some Melting Furnaces Are Stronger Than Others

Some furnaces are more efficient than others. To select the right supplier, you should look at the warranty provided. A reliable manufacturer will back up their service delivery ability using a warranty. Confirm using tests that the device is working. There are also essential parts to check before purchasing a silver melting furnace device.

  • Features of The Furnace

When choosing a supplier for your silver melting kit, you should choose a customized furnace. The chances are that there are endless features to consider when selecting a furnace. This factor should be considered wisely. Your space restrictions should also be considered. Can the furnace being sold by the manufacturer serve your needs?

  • A Look At The Temperature Differences

The temperature range of your custom furnace is a significant factor to consider when selecting a silver melting furnace. Although a broad range of selection can be more appealing, it may be challenging to buy a furnace that has varied maximum temperatures. An experienced furnace supplier should be able to provide this.

  • Fuel Efficiency Rating

Check the fuel utilization efficiency of the silver melting furnace you’re about to buy from the manufacturer. This refers to the measurement of how easily the furnace converts fuel to heat. The statistic is taken over one year. Ideally, you should choose a supplier who can sell a furnace that has the highest fuel utilization efficiency.

Silver Melting Furnace
  • Take Away

A good silver furnace manufacturer will support you through the purchasing process. You need to be confident about purchasing the melting furnace from a reliable seller. They should also have an excellent reputation.

July 25, 2019 0 comment
0 FacebookTwitterPinterestEmail
diaphragm control valve
Technology

Working principles of different types of a diaphragm control valve

by Mercert July 20, 2019
written by Mercert

An automatic recycling valve is made up of connections of various parts. For instance, the diaphragm control valve is one of such parts connected into a multiplicity of piping systems. It plays a critical role in ensuring the efficient working of the valve. However, there are different connection types of diaphragm valves, as discussed in this article.

  • Threaded connections

Threaded diaphragm type of valve has external and internal threads that are used to screw the pipe over or into the valve end. The technique works effectively, and it is one of the commonly used. The approach used is simple, and therefore, it is easy to repair when necessary.

  • Compression fitting connections

Similarly, compression fitting is another control valve connection used in a diaphragm connection commonly used in pipes. However, this type of connection is made without threading or soldering. As a way of forming the seal, one net is tightened to compress the washer around the second pipe. Consequently, a watertight closure is formed.

  • Clamp flange connections

Diaphragm valve manufacturers designed clamp flanges connections to help control the inflow and outflow in a pipe. It uses spring hinge flanges, clamp flanges, to wrap around the pipe and make a connection in return. Consequently, the inflow and outflow can be controlled using the connection in question.

  • Bolt flanges connection
diaphragm control valve

Likewise, diaphragm type in question is used in many piping works. The connections are used at the outlet or inlet of the valve to control the flow. However, the connection can be in different sizes depending on the user’s specifications. For instance, you can make a 1 2 inch diaphragm valve if you do not have a wide range of flow rate.

  • Buttweld connections

A butt weld automatic diaphragm valve is another similar connection that holds a joint between two sections. Subsequently, the two are butted together without an interlock or overlapping. They form a tight joint that prevents the passage of any substance. 

  • Socket weld/Solder connections

The fifth diaphragm type of valves in piping is the socket solder or weld. In this method, the connection is made by soldering two pieces together tightly. As a result, the joining prevents the passage, thus making a valve. The technique is simple to use and maintain, as well.

  • Metal face seal connections

In this type of connection, a sandwiched metal gasket between two fittings parts is used. Consequently, a face seal is formed on the two sides of the fitting, thus blocking the flow. The industrial diaphragm valve is commonly used in various fields.

In conclusion There are various techniques used to make diaphragm control valves to control the flow in pipes. Although they all serve the same purpose, the connections are made differently. Discussed above are various types of diaphragm connections and their working principles. They can be used as a guideline to enable you to make a decision on the type of connection that would suit you better.

diaphragm control valve
July 20, 2019 0 comment
0 FacebookTwitterPinterestEmail
Classic Chandeliers
Life Tips

Tops Tips For Selecting The Right Classic Chandeliers

by Mercert July 18, 2019
written by Mercert

Whether you’re looking to purchase a lighting fixture or grace your home foyer, setting the tone of your dining room, classic chandeliers are the perfect choice for creating a significant impression. In the current era, modern, contemporary, as well as transitional styles, provide an expanding array of various fixture designs. Besides style and material, there are certain elements to weigh when choosing a YIOSI Baccarat chandelier.

What’s the correct diameter?

You should measure the length as well as the width of your room. Sum up the two numbers. For instance, if the room is 6 feet wide by 10 feet long, the total is 16 feet. Change the quantity to inches. You’ll get a number that better works for your chandelier’s diameter. You’ll realize that in this case, a chandelier that has a diameter of 16 inches will fit into a room of 6 by 10.

Your style should match your room.

Your choice of chandelier needs to match your room. It shouldn’t detract from its theme. As such, a chandelier in the girl’s bedroom can have dangling crystals. A chandelier in the living room can be rustic with twigs as well as faux antlers. For a room that has a shabby touch, you can try a classic chandelier that has a rugged finish of antique glass sconce shades.

Alter the height of your new chandelier

You can use pliers to remove a few links in the chain. After that, coil up the electrical wire found in the ceiling of your house. If your chandeliers don’t have a chain, then you can establish if it comes with sliding for adjustment. Most chandeliers are known to have a sliding mechanism to allow you to shorten the length.

Determine the length of the needed chandelier

The taller your ceiling is, the taller your chandelier should be. It’s vital to note that a foyer chandelier needs to hang about 6 feet off your floor. This should be measured from the bottom of that chandelier. For one that’s suspended above your dining room set, there need to be approximately 28 inches from the base of the chandelier to your tabletop. 

Determine where to hang your chandelier

The location of your chandelier will have an impact on the selected chandelier lighting style. Although most individuals think of placing chandeliers in rooms, there are other areas of the house where you may hang a chandelier. You could hang one that has a dimmer switch over the bed and transform it into a candlelight level to achieve a romantic feel. You can also install a mini chandelier over your claw-foot tub in the bathroom to acquire some glamour. 

Decide if it’s double or nothing.

There are times when one chandelier is perfect for a room. But, sometimes, two can serve a higher purpose. For instance, if you own a long dining table, you should think about the length in lighting. You also want to ensure that you illuminate the centerpiece of the table.  One significant way of acquiring a perfect look using a chandelier is by getting the right light to go with multiple other chandeliers.

Consider the style of your room.

There are different themes of rooms. There are also different styles of chandeliers, including modern luxe, vintage, and industrial. You should select one based on the message you’re passing access. Is it going to be simple or elegant and complicated? You can also blend in to get along.

Conclusion

If you have a room that’s filled with architectural interests, you should get a classic chandelier. All in all, picking the right chandelier for your house can be a daunting task. With the tips above, you’ll find it to be less complicated.

July 18, 2019 0 comment
0 FacebookTwitterPinterestEmail
Health

How To Ensure That Your Refrigerator Water Filters Last Longer

by Mercert July 8, 2019
written by Mercert

Buying bottled water for everyday use can get quite expensive over time. A good solution would be to get the LT1000P water filter which removes any kind of impurity that is present in the water. In addition to getting chilled drinking water dispensed directly from the fridge, it will also have a fresh taste. Refrigerator Water Filters are pretty easy to fix and don’t require any plumbing work at all.

What You Should Know Before Buying Refrigerator Water Filters

Before you get a home refrigerator water filter, you should have a rough idea of what type of filter you should buy and how you’re supposed to take care of it. Let us look at some facts associated with these water filters:

1. Are Refrigerator Water Filters Easy to Install?

The installation of refrigerator water filters is not a complicated process. The most important thing is that the filter you get is compatible with the model of your fridge. A safe bet would be to get the same brand of the filter as the fridge. If you’re not so sure, check the internet or ask the store attendants to help you out.

2. How Regularly Should I Change My Refrigerator Water Filters?

Maintenance is key if you want your filter to serve you for a longer time. Not only will it be in operation for a longer lifespan but it will also operate at a good quality.

Filters work by filtering out dust and dirt using a filtering medium such as activated charcoal. These particles accumulate on the filter and may cause it to become clogged and this hinders the proper functioning of the filter. When the filter is clogged, it’s no longer effective and this compromises the quality of ice and water given off. This means that you need to replace the filter regularly – factor in the cost of replacing filters when you’re doing your home-expenditure budget. When you are doing the replacements, check the manufacturer’s refrigerator water filter replacement instructions on the manual.

Refrigerator Water Filters filtration

3. Check the Indicator Light on the Refrigerator Water Filters

There are some filters come with an indicator light that tells you when it’s time to replace them. Almost all the new fridges have a filter replacement indicator light so you can easily tell when the filter is broken and needs replacement. Manufacturers recommend that a water filter be replaced after every six months.

If the water filter doesn’t come with a light, check the filtering speed; a slower-than-usual speed may be an indicator that it’s time to replace the filter.

4. Check the filtration speed by the Refrigerator Water Filters

A filter that is working very slowly will take so much time to fill a glass of water. This can get quite frustrating especially if you have a big family and need a lot of filtered water on a daily basis. If your refrigerator dispenser is giving off the water at a slow speed, you might have to consider replacing the water filter even if the recommended 6-month period isn’t over yet. The speed may be slow and the indicator light is still off. Replace the filter nonetheless.

5. What Quality Of Water/Ice Does The Refrigerator Water Filters Give?

 Another way to tell if the water filter is working well or not is to check the quality of water/ ice it produces. The water and ice should be crystal clear with no strange smell, weird taste, or impurities. The presence of any of these shows that the filter is not doing an effective job.

Conclusion

Your fridge will not just be compatible with all types of refrigerator water filters. Now that you know there are different filter models in the market, you need to pay close attention before making a purchase. Check the reviews left by other customers to ensure you find one that best suits your needs. For example, if your biggest issue is chlorine, find a filter that specifically removes the chlorine. Also, if you want to know about Home Water Filter, click here.

July 8, 2019 0 comment
0 FacebookTwitterPinterestEmail
best air compressor
Life Tips

Features To Consider While Purchasing Best Air Compressor

by Mercert July 4, 2019
written by Mercert

An air compressor function in the car is essential since the tires might need a pressure refill once in a while. Subsequently, several features have been added to air compressors, making them more effective and efficient. However, for tire refill in a car, not all the equipped features are necessary. Ainope has specialized in this field and thus can give several tips that you need to check if your planning to buy the best air compressor for your vehicle.

  • Portability of air compressor

Portability is one of the key factors to consider while checking an air compressor for sale. Given that a vehicle can have a tire puncture randomly, the tool should be in the car all through. Therefore, if your air compressor is not easily portable, you are most likely to be stranded. As a result, the weight of the device becomes a vital factor to consider.

  • Size of the air compressor

Due to technology advancement in the modern world, air compressor types have increased in the market, leaving the users in a dilemma. However, checking the size of the tool in question is one of the important features you should use to settle for a decision. Smaller air compressors in size are more beneficial since they will efficiently serve the purpose, and they only need a relatively small space in your car.

best air compressor
  • Air filters in an air compressor

Air contains numerous particle of other substance such as moisture. However, when the concentration of such particles increases in the air compressor, they are more likely to damage it. Therefore, when looking for the best air compressor with a longer duration, the air filter is one of the features to consider.

  • Pressure switch

A pressure switch automatically shuts down the motor when the pressure in the tank extends to a specific value. Besides, when the value in question goes below the specific level, the pressure switch automatically turns itself on. Air compressor machines equipped with such feature gives you an added advantage since you don’t have to worry about when it is safe to use it.

  • Thermal overload protection

While in use, the mechanical component of an air compressor generates heat, which is more likely to damage the machine if it exceeds certain limits. As a result, the durability of the unit will be shortened, thus not serving you efficiently. If you need to avoid that, it is advised that you purchase compressor types equipped with thermal overload protection.  

best air compressor
  • Air compressor price

An air compressor price varies in different shops. Some seller may overprice their products while others might produce substandard units so that they can be relatively cheap. To get the right price for a quality air compressor, you can consider checking the features of the unit, to know its value.

In conclusion

Technology has greatly advanced in the air compressors manufacturing field. Consequently, numerous features have been added, air compressor function in car more efficient. However, for car use, only a few features are essential. If you are considering buying an air compressor for your car, the features stated above are what you should look for.

July 4, 2019 0 comment
0 FacebookTwitterPinterestEmail
vaping 1
Life Tips

A beginner’s guide to vaping

by Mercert July 4, 2019
written by Mercert

It is a common misconception that vapes are only popular with people who are smokers and ex-smokers. The truth is that a lot of non-smokers are fans of vaping since it’s a much safer way of smoking and they can enjoy an array of different flavors. What’s more, vapes, as you can check on Hleefcig, come in so many shapes and sizes that if you are into fashion, you can definitely find a vape that would match your style.

1.    Why is vaping better than smoking?

We still have to witness some studies conducted on vaping vs smoking, but since there hasn’t been enough research done, we can only say that those that have been conducted so far showed that vaping is much safer than smoking since it’s not so harmful to lunch.

Does vaping harm your lungs? Can vaping cause cancer? The answer is affirmative, but you should also know that it’s much less harmful than smoking. Some studies even show that vaping is just like nicotine patches – it has pretty much the same impact on your health.

2.    What makes vaping so special?

The essential part of vaping is a vape consisting of a vape mod, a coil, and a tank. There are so many different types of vape mods on the market but normally they all use lithium-ion batteries. The smartest thing to do is to buy the best vaping mods based on your experience.

Beginners should know that vape mods come in different shapes and sizes and this is the most noticeable part of every vape. There are those with low power that is mainly in e-cigarettes and vape pens and normally these are without adjustable power. They are also great for users who don’t have a lot of experience.

Moreover, there are those medium power types of vape mods which require some experience since they often come with adjustable power of up to 100 watts. Just like with high power ones, medium power vapes require battery safety knowledge in order to be safe and prevent a possible vapor batteries explosion.

3.    What are vaping terms VG and PG?

If you take a closer look at the best vaping supplies, you will soon realize that there are many best vaping starter kits out there that mention the terms VG and PG. These terms don’t make vaping more complicated for beginners – they are simply related to e-juice you take.

If you are into science, then you’d probably like to know that PG stands for Propylene Glycol and VG stands for Vegetable Glycerin. Both of these vaping fluids are completely odorless, but PG gives the same sensation to the throat as if you were smoking a real cigarette. Both of these are quite safe to use since they are used in a lot of beauty and hygiene products as well as pet food too.

When vaping, you usually combine two liquids to get the most pleasure out of it. You can combine PG and VG. For example, if you use more PG, you will get a sharp feeling in the throat. However, if you use more of VG, you will have a smoother feeling.

4.    What vaping equipment to buy?

There are several types of vapes – Clearomizers, Sub-Ohm Tanks and Rebuildables. Clearomizers are the most common and the most popular whereas Sub-Ohm vapes have much more power and therefore, require a strong battery.

As for the Rebuildables, they are suitable only for experienced vaping users since you basically need to make your own coils but this means that you will have more flexibility in choosing your e-juice.

July 4, 2019 0 comment
0 FacebookTwitterPinterestEmail
MADE BY Metal Engraver
Technology

How to Ensure Your Metal Engraver Is Safe

by Mercert July 2, 2019
written by Mercert

HeatSign Metal engraving machine is commonly designed to use plenty of power in MW. Therefore, they are fast when it comes to engraving metal. Nonetheless, if carelessly handled, they can be unsafe to use. Something as simple as looking directly to the beam can be harmful to the eyes.

Therefore it’s essential to know and understand safety measures you should take to ensure your safety. Here are some safety tips you should know.

Read instructions

Before you plug in your handheld metal engraving machine into power, read the user guide manual from the manufacturer. You never know the potential at which you can harm yourself simply because you left an instruction unread. Besides, reading instructions can give you insights needed to make your handheld laser marking system consistent and easy to use.

Reading instructions improves your functionality, and you get to know how to make laser engraving entirely. In fact, some laser machines require you mount safety feature before you start using them. If you fail to read instructions, the following could happen:

  • Eye injury

Staring directly to the laser beam is not healthy even if you stare at it for a microsecond. It can cause permanent or temporary eye defects. Unless you’re a hundred feet away avoid looking in the beam when the engraver is plugged in. Additionally, cutting a shiny surface scatters more laser light, so avoid them or ensure maximum protection of your eyes.

  • Burn

Laser engraver uses high electrical power. The power/heat is meant for metal engraving. Imagine the damage it can do to your body if it came into contact with it or if you handled it carelessly.

  • Inhale smoke

Engraving any material requires plenty of burning after which the content is turned into smoke. Some of the metal components are harmful to your health when inhaled. Avoiding these fumes is easy if you follow manufacturers’ instruction to the latter on protecting yourself while using the metal engraver. Make use of sniff-mask; they will filter the smoke leaving you to inhale fresh air.

Make Warning Marking On The Engraver Machine

Put danger sign on the machine. Pretty scaring but better safe than sorry. Mention which laser type it is, maximum power it should use, and wavelength. Ensure the handler of the laser machine knows the dangers that come with using the device carelessly.

If an employee is using the machine for the first time, ensure they are supervised. Additionally, state in detail the procedure of wearing protective clothing, mounting safety knot on the laser, enclosing beam light, and every aspect that involve the machine to prevent accidents.

Metal Engraver 1

Take Control

  • Engineering control

There are inbuilt safety features for every handheld metal engraving machine which includes emergency off control, housing interlock, stand by control options, visible and audible emission indicator, and beam attenuator. All these features should comply with the recommended standard.

  • Procedural control

Control of electrical hazard, flammable hazard prevention, visual prevention delivery system, controlled access, and beam emission should get managed with policies and procedure in the healthcare center.

  • Administrative control

This is where you have to train the users of metal engraver before they start using the machine. There should be a team that controls the use of the device and should include laser safety officer, a group of the safety committee, and development of document entailing details on safe usage of the machine.

All these controls should be reviewed by an outside inspector to ensure safety for your employees and yours too. The LSO should calculate NOHA or NHZ, which is the area within which safety measures against laser radiation should be taken. It’s easy to do the calculation and set boundaries because the manufacturer already states that in the documentation of the portable metal laser engraver.

Another critical thing in controlling the usage of the handheld metal engraver is to place a dedicated operator at the room which the machine is stored to ensure safety is observed whether the machine is in use or not. The operator should put a sign to indicate when to use protective gears (when the device is in use) and when it’s not necessary.

The windows and doors should be covered with barriers against wavelength that could transmit through them. The LSO is equipped with the knowledge to determine the type of protective barrier to be used on the doors and windows.

Another control factor is, to never leave the metal engraving machine unattended. If the operator has to leave the operation room, he should ensure that the device is unplugged and the key stored in the safety box. 

Testing the metal engraver

The machine uses electrical power which, when overlooked, can be dangerous. However, to prevent possible danger as a result of a power surge, it is essential to plug and test the machine. Follow all safety procedures before you use the tool. Ensure there are no flammable materials in the room. Ensure electrical plugs and sockets are in good working condition before your machine is put to use.

Auditing Safety Of The Machine

Depending on the number of users using a metal engraving machine, amount of heat, and frequency at which the machine is used, an audit should be carried out once in a year.

Through auditing, you can identify areas that need changes, replacement, and further knowledge on the use of engraving machine. Verification includes interviewing the user of the engraving machine, testing the equipment and electric supplier and monitoring the outcome of the engraved piece.

The audit report will confirm the continuity of handheld metal engraving machine or halting the production until all the requirements are met.

Metal Engraver

Take Away

It’s essential to look out for your safety when using machines meant to provide your daily bread. There is no carelessly exposing yourself to harmful emission only to use your salary in hospital bills instead of taking care of your family.

Therefore, follow the instructions indicated by the manufacturer for handheld metal engraving machine to the latter to prevent possible accidents. Additionally, if you’re an employer, ensure your employees are well provided with the protective measure. Above all, ensure business continuity, which will result in economic growth.

July 2, 2019 0 comment
0 FacebookTwitterPinterestEmail
Newer Posts
Older Posts

Copyright All rights reserved.


Back To Top
vosprofils.com
  • Home
  • Technology
  • Contact
  • About Me