Here are the Most Common Types of Finishing Service

by Mercert

There are a lot of different finishing services. A lot of them reshape and remove the surface layer of products. These different finishing techniques could be applied to different materials, tighter tolerances, increased durability, improved functionality, and better appearance.

So if you are ready to learn about the various types of finishing services in greater detail, click that link and let’s get started!

Common Types of Finishing Service

Below is a list of the main kinds of finishing services.

1. Electro Polish Finishing Service

This type of Finishing Service uses electric current to get rid of materials from machine surfaces and their components. These processes improve the finish of surfaces by levelling out valleys and micro peaks on the layer of the metal surface, created during the process of machining.

Further, Electro Polish is the opposite of electroplating, which uses current to put on more materials on the surface of machine components.

2. Grinding Finishing Service

This refers to the process that uses grinding wheels that are abrasive to get rid of materials from the top of precision components. This helps to improve the surface’s finish and create accurate dimensions, and they also lead to a wide variety of applications. These all depend on the geometry of turned components.

There is centered grinding, which might be used to finish the process. Grinding is usually done using Outside Diameter, Inside Diameter, and several other components like flats, slots, and holes.

Grinding is divided into two different parts:

● Honing

This refers to a grinding subset. It is used from the Inside Diameter of the precision component, which is machined. Even though honing is a grinding process, it tends to appear more like a polishing process. Honing processes make use of rotating stones which is also known as hone. These have clear abrasives that get rid of delicate layers on the surface of the material.

● Lapping

Lapping is the second subset of grinding. It is used on the Outer Diameter (OD) to serve as a turned precision component, improving the finishing service and creating tight dimensional control. This process has abrasive materials which serve as paste forms that are applied on lap plates. These components are passed against plates to get rid of the polish available on the top layer.

3. Laser Engraving Finishing Service

This refers to the process that uses lasers to make images like numbers or letters on the logo appear on the top of a specific Machined component. The laser beams make the metal vaporize. The entire process is used when the shape or font required cannot get created through the milling or turning method. Because the font cannot reach using normal methods like turning or milling, laser engraving finishing service type is used instead.

Final Thoughts

In all, finishing services have a lot of types, and rules that aid qualified partners to finish their finishing service tasks quickly and with haste. Finishing services can be applied to different sectors such as the medical and engineering industry. They aid in the creation of finished components that meet several essential requirements. These finishing service types end up being essential to provide needed finished products.

You may also like

Leave a Comment